Fill in the gaps with the missing words- rush, performed, actual, average, remote, ejector, timing, advisable, consumption, judge
Types of Engine Logbook Entries
Main engine: (1) of watch, fuel level settings, engine load,
(2) rpm, flow meter reading, main engine fuel (3) for 4 hours, main engine exhaust units temperature, main engine fuel oil inlet temperature, all coolers sea water inlet/outlet of air, lube oil, piston and jacket cooler temperature.
Turbochargers: Turbocharger rpm, cooling water in & out temperature, air cooler in & out temperature, pressure drop across turbocharger air cooler filter to (4) the blo- ckage, air temperature in and out of the turbocharger, exhaust gas temperature in & out.
Fresh Water Generator: Jacket cooling water in & out temperature, condenser sea water in & out temperature, (5) pump pressure, distillate pump pressure, feed line pressure, flow meter reading for fresh water.
Engine Control Room
Most of the readings and entries mentioned above can also be taken from the ship’s control room, although it is (6) to take local readings. Yet, these readings can be compared to those of the (7) indications. This will also give an idea about the variation in the two so that, in case of any large deviations, necessary checks can be (8) . Also, in case of (9) hours such as manoeuvring, the engineers would know the actual readings if they are familiar with the deviations in control room and (10) readings.
